Ford Racing 2013 Mustang Project Car

Ford Racing knows that the best way to sell parts is to let people see them on a car. For that reason they have built quite a few project cars over the years that serve as rolling examples of what can be done with parts from the FRPP catalog. Ford Racing isn’t afraid to prove their their cars’ merits, either. Their last project, a supercharged 2011 Mustang GT, set a record for the fast production car for a close half mile course a little over a year ago at Bristol Motor Speedway.

With the launch of the 2013 Mustang, though, it’s time for a new project. The car, featuring the new Gotta Have It Green paint color, actually made its debut alongside the 2013 Mustang Cobra Jet and Boss 302SX Concept at the PRI Show back in December, but this is the first time we’ve got official details and photos from Ford Racing. Like its predecessor, the 2013 Mustang has the FRPP 2.3-liter supercharger system under the hood as well as a variety of other performance upgrades including upgraded Brembo front brakes, an adjustable FRPP suspension system, tubular rear lower control arms and more. The exterior is fairly subtle, featuring black Track Pack wheels and a Boss 302 Laguna Seca front splitter.

You can see a full list of upgrades and photos of the Ford Racing 2013 Mustang project car below.

Ford Racing 2013 Mustang Project Car Features:

Engine and Drivetrain

  • Engine: Coyote 5.0L Ti-VCT aluminum block and heads
  • Ford Racing Billet Aluminum Cap Set, M-6766-M54
  • Boss 302 Coil Pack Covers, M-6P067-M50B

Power Adder

  • Supercharger: FRPP/Whipple 2.3-liter supercharger, intercooled twin-screw, M-6066-MGT624D
  • Fuel System: Sequential mechanical returnless with 47 lb./hr. injectors


  • Ford Racing Mustang GT Side Exhaust System, M-5220-MB, w/ Sport muffler kit, M-5230-MGTLA


  • Getrag MT82 six-speed manual w/ Boss 302 Trans Cooler Scoop, M-5025-MBR
  • 8.8-inch Rearend with Ford Racing 8.8-inch axle girdle/cover, M- 4033-G2


  • Engine Management: Copperhead PCM w/Prototype FRPP Supercharger  tune
  • Ignition High-output coil-on-plug

Front Suspension

  • Struts: FRPP Dynamic dampers
  • Springs: FRPP, 1-inch drop
  • Front Brakes: Brembo 4-piston caliper, 14-inch front brake kit, M-2300-S
  • 2013 Mustang Laguna Seca Brake Duct Kit, M-2004-MBA

Rear Suspension

  • Shocks FRPP Dynamic dampers
  • Springs FRPP, 1-in drop
  • Tubular Rear Lower Control Arms M-5649-S
  • Lower Control Arm Relocation Brackets M-5650-A


  • Wheels: Mustang Track Pack Black 19×9-in M-1007-DC199B
  • Tires: Pirelli PZero 255/40/ZR19


  • 2013 Laguna Seca Adjustable Front Splitter, M-16601-MBA
Ford Racing 2013 Mustang Project Car 02-ford-racing-2013-mustang 03-ford-racing-2013-mustang 04-ford-racing-2013-mustang 05-ford-racing-2013-mustang 06-ford-racing-2013-mustang

[Source: Ford Racing]

Be Sociable, Share!

One Response to “Meet Ford Racing’s 2013 Mustang project car”

  1. insurance companies Says:

    insurance companies

    Meet Ford Racing’s 2013 Mustang project car | Mustang News

Leave a Reply


Get every new post on this blog delivered to your Inbox.

Join other followers: