Shelby has been working their legendary magic on the GT500 since its modern reintroduction, first offering a 650 horsepower Super Snake
package in 2007 and ramping up the performance nearly every year since.
In 2011 Shelby offered up their most powerful Super Snake yet with an
incredible 800 horsepower from the supercharged 5.4-liter V8. For most,
that would be plenty of horsepower for a street car. For Carroll? Not
quite enough.
“Upon the completion of the 800 horsepower Super Snake we took him
around the track in it and he was excited and he jumped out of the car
and we all stood there expecting to get a big ol’ Shelby hug,” Shelby
president John Luft
tells us. Instead, they got a question they didn’t expect. “He looked
at the development team and said ‘ok, when are we going to have
1,000?’”
It was then that the Shelby team began working diligently on what
would simply be called the ’1000.’ Of course, Carroll was deeply
involved in the project despite his age and declining health. “His
involvement in the Shelby 1000 was from the day we put a pencil to
paper to the day we took it around the track,” Luft remembers.
“Carroll was actively involved in every aspect of the Shelby 1000′s
development, from the design to the testing and ultimately his final
approval.”
The concept was not just to build a Mustang with 1,000 horsepower,
but to build the best Shelby Mustang from top to bottom. “It was
conceived as the ultimate Shelby and honed during substantial testing.”
says Gary Patterson, vice president of operations.
At the heart of the Shelby 1000 is a supercharged 5.4-liter V8,
although it barely resembles the engine that is found in the stock
GT500. While the Super Snake’s underhood upgrades mostly consist of a
larger supercharger and an upgraded fuel and cooling system, Shelby left
almost nothing untouched when it came to the 1000.
“We took the serious hot rod approach by taking Ford’s 5.4 liter
engine down to the block, and beefed up the internals by machining it
for new rods, crank and pistons,” says Gil Navarrez, Shelby
American’s Speed Shop director. Shelby also added their own spec of
camshafts, valve springs, titanium retainers, stage 3 ported heads, a
high-flow fuel system with 80 lb injectors and an upgraded cooling
package with heat exchanger.
Customers have a choice of a Kenne Bell 3.6-liter supercharger or a
Whipple 4.0-liter supercharger. The Kenne Bell, used on this car, is
matched to a single blade 2350cfm throttle body fed by a 4.5-ich inlet
pipe and 127mm MAF. Both street and off-road track versions of the
engine are available, producing either 950 horsepower on 91 octane or
1,100 horsepower on race fuel. The latter also includes a set of custom
2-inch racing headers with 3.5-inch collectors. Only a handful of other
supercars can claim those numbers, and none come even close to the
1000′s price range.
Quite a lot was done to ensure the rest of the drivetrain remained
intact as well. Horsepower is fed through a heavy duty twin-disc clutch
and aluminum flywheel assembly, a custom aluminum driveshaft with billet
flange and a custom 9-inch rear end with Wavetrac differential. A
driveshaft tunnel brace and a billet transmission support were also
added.
While Shelby’s main goal for the engine was to produce as much power
as possible, they also didn’t forget to pay attention to the details.
Items like the supercharger pulley and manifold have been etched with
the Shelby 1000 name, and billet aluminum pieces can be found throughout
the engine bay. A plaque on the valve covers also shows the specific
CSM number for each 1000.
The 1000′s performance isn’t just limited to the engine, though.
“This car is the total package,” Luft tells us. The basis for the 1000′s
suspension is Eibach’s R2 adjustable suspension system, allowing the
driver to change the ride settings for different scenarios. Shelby
didn’t stop there, and has a full range of parts that come standard on
the car including caster/camber plates, a lightweight k-member with
tubular control arms, a billet aluminum watts-linkage and an anti-wheel
hop upgrade.
The 1000′s brakes have been upgraded as well, courtesy of Wilwood. Up
front are a set of 14-inch discs with 6-pistons calipers, while 14-inch
discs with 4-piston calipers are at the rear.
While you might expect a 1,000 horsepower Shelby Mustang to have
matching looks, the 1000′s appearance is actually somewhat tame. Luft
tells us this is because of customer input during the design phase.
“They overwhelmingly asked for this stealth exterior approach,” he tell
us. “Something cast in the mold of the most serious muscle cars of the
’60s. Everything was engineered and designed with a ‘form follows
function’ philosophy.”
Up front the 1000 gets a carbon fiber splitter, and a custom
fiberglass hood provides a little more room for the larger supercharger
system. The bulging hood is close enough to stock that it takes a keen
eye to notice the difference. Out back is a new rear diffuser, and
relatively subtle ’1000′ graphics are placed on the side and rear
decklid.
Of course, for those customers that want something a little more
aggressive Shelby also offers a widebody package. The new fiberglass
fenders add six inches of total width to the car, allowing for 13-inch
wide rear wheels and 10-inch wide front wheels. This particular car is
the very first 1000 to get the widebody package.
Like the exterior, the Shelby 1000′s interior is relatively simple
with only subtle styling changes. The GT500′s Recaro seats have been
revamped by Katzkin and featured an embroidered Shelby 1000 logo. A new
MGW short-throw shifter replaces the stock unit, just behind which lies a
plaque with the car’s CSM number. Finally, Shelby adds an a-pillar
gauge pod with readouts for boost, fuel pressure and oil pressure.
As you might expect, all of this comes at a price. The post-title
package for the Shelby1000 starts at $149,995. Add in the cost of the
donor Shelby GT500, and that puts you at $199,604 for a 2012 model or
$204,199 for a 2013-2014 version. Want the track-only S/C version? Tack
on another $5,000.
Yes, the Shelby 1000 is ludicrously expensive, and yes, you could
probably build a similar car for cheaper. However, we still applaud
Shelby for building the car. Just because we can’t afford one doesn’t
mean we can’t appreciate what it is.
We imagine that the Shelby 1000 will be one of the most collectable
Mustangs in years to come. Not only because it’s the most powerful or
because it will be one of the rarest (production is limited to 100), but
because it was the last car that Carroll ever saw to production.
July 9th, 2014 at 10:59 pm
This is known as house cooking and not only does it not remove mold, it fosters its growth.
You will need to mix a cup of it in a gallon of water and then scrub the
affected area two or three times until all the traces of mold
have been removed. As a result, many loops in the landscape are formed and eventually these
loops cut off the river, forming lake-type bodies of water adjacent to the main river.
Feel free to visit my website – Austin mold clean up
July 11th, 2014 at 3:21 pm
We’re a group of volunteers and starting a brand new scheme in our community.
Your site offered us with useful info to work on. You’ve done
an impressive task and our whole neighborhood will probably be grateful to you.
my web-site – Arianna Pattek
February 22nd, 2015 at 8:33 pm
Bitcoin thereby spontaneously built a price, as do all points in a free market if they are adequately scarce as well as sufficiently beneficial.
February 23rd, 2015 at 1:15 pm
Online from 2013, Firstclass Bangers” has actually offered 100’s hip jump pounds to hundred’s of happy customers.
February 23rd, 2015 at 3:50 pm
This is a site where you will certainly discover free of charge classified
ads on-line along with all kind of things available for
sale in your location.